EFFECT OF VARYING VOLTAGE ON ELECTRON DENSITY IN OXYGEN HOMOGENEOUS DIELECTRIC BARRIER DISCHARGE UNDER ATMOSPHERIC PRESSURE
Article Sidebar
Published:
Nov 30, 2019
Keywords:
DBD I-V waveforms uniform discharge power balance method electron density
Main Article Content
Abstract
The formation of uniform dielectric barrier discharges (DBDs) under atmospheric pressure is a remarkable achievement with the addition of electronegative gasses in closed reactors. This work is the part of dielectric barrier discharge achieved under atmospheric pressure. A uniform glow discharge is produced in capacitive discharge reactor. An alternating voltage source (0-2.5) kV having frequency of 50Hz is applied across the two parallel disc electrodes. A couple of dielectrics (glass) used as a discharge barriers one on each electrode. The oxygen gas injected into the reactor controlled by mass flow controller with flow rate 30ml/min. The current-voltage waveforms for oxygen discharge achieved, fulfilling the basic conditions of discharge homogeneity. The diagnostic techniques rely on electrical discharge method and power balance method to differentiate discharges and estimate the electron density for different values of applied voltages. A significant relation is found indicating the variation of electron density with applied voltage.
Downloads
Download data is not yet available.
Article Details
How to Cite
Khan, A. A., Ling, Y. S., & Chowdhury, Z. Z. (2019). EFFECT OF VARYING VOLTAGE ON ELECTRON DENSITY IN OXYGEN HOMOGENEOUS DIELECTRIC BARRIER DISCHARGE UNDER ATMOSPHERIC PRESSURE. Malaysian Journal of Science, 38(Sp3), 10–20. https://doi.org/10.22452/mjs.sp2019no3.2
Issue
Section
UMInd2018 (Published)
Transfer of Copyrights
- In the event of publication of the manuscript entitled [INSERT MANUSCRIPT TITLE AND REF NO.] in the Malaysian Journal of Science, I hereby transfer copyrights of the manuscript title, abstract and contents to the Malaysian Journal of Science and the Faculty of Science, University of Malaya (as the publisher) for the full legal term of copyright and any renewals thereof throughout the world in any format, and any media for communication.
Conditions of Publication
- I hereby state that this manuscript to be published is an original work, unpublished in any form prior and I have obtained the necessary permission for the reproduction (or am the owner) of any images, illustrations, tables, charts, figures, maps, photographs and other visual materials of whom the copyrights is owned by a third party.
- This manuscript contains no statements that are contradictory to the relevant local and international laws or that infringes on the rights of others.
- I agree to indemnify the Malaysian Journal of Science and the Faculty of Science, University of Malaya (as the publisher) in the event of any claims that arise in regards to the above conditions and assume full liability on the published manuscript.
Reviewer’s Responsibilities
- Reviewers must treat the manuscripts received for reviewing process as confidential. It must not be shown or discussed with others without the authorization from the editor of MJS.
- Reviewers assigned must not have conflicts of interest with respect to the original work, the authors of the article or the research funding.
- Reviewers should judge or evaluate the manuscripts objective as possible. The feedback from the reviewers should be express clearly with supporting arguments.
- If the assigned reviewer considers themselves not able to complete the review of the manuscript, they must communicate with the editor, so that the manuscript could be sent to another suitable reviewer.
Copyright: Rights of the Author(s)
- Effective 2007, it will become the policy of the Malaysian Journal of Science (published by the Faculty of Science, University of Malaya) to obtain copyrights of all manuscripts published. This is to facilitate:
- Protection against copyright infringement of the manuscript through copyright breaches or piracy.
- Timely handling of reproduction requests from authorized third parties that are addressed directly to the Faculty of Science, University of Malaya.
- As the author, you may publish the fore-mentioned manuscript, whole or any part thereof, provided acknowledgement regarding copyright notice and reference to first publication in the Malaysian Journal of Science and Faculty of Science, University of Malaya (as the publishers) are given. You may produce copies of your manuscript, whole or any part thereof, for teaching purposes or to be provided, on individual basis, to fellow researchers.
- You may include the fore-mentioned manuscript, whole or any part thereof, electronically on a secure network at your affiliated institution, provided acknowledgement regarding copyright notice and reference to first publication in the Malaysian Journal of Science and Faculty of Science, University of Malaya (as the publishers) are given.
- You may include the fore-mentioned manuscript, whole or any part thereof, on the World Wide Web, provided acknowledgement regarding copyright notice and reference to first publication in the Malaysian Journal of Science and Faculty of Science, University of Malaya (as the publishers) are given.
- In the event that your manuscript, whole or any part thereof, has been requested to be reproduced, for any purpose or in any form approved by the Malaysian Journal of Science and Faculty of Science, University of Malaya (as the publishers), you will be informed. It is requested that any changes to your contact details (especially e-mail addresses) are made known.
Copyright: Role and responsibility of the Author(s)
- In the event of the manuscript to be published in the Malaysian Journal of Science contains materials copyrighted to others prior, it is the responsibility of current author(s) to obtain written permission from the copyright owner or owners.
- This written permission should be submitted with the proof-copy of the manuscript to be published in the Malaysian Journal of Science
References
Balcon, N., Aanesland, A., & Boswell, R. (2007). Pulsed RF discharges, glow and filamentary mode at atmospheric pressure in argon. Plasma Sources Science and Technology, 16(2), 217.
Di, L., Zhang, J., & Zhang, X. (2018). A review on the recent progress, challenges, and perspectives of atmosphericâ€pressure cold plasma for preparation of supported metal catalysts. Plasma Processes and Polymers, 15(5), 1700234.
Dong, L., Qi, Y., Zhao, Z., & Li, Y. (2008). Electron density of an individual microdischarge channel in patterns in a dielectric barrier discharge at atmospheric pressure. Plasma Sources Science and Technology, 17(1), 015015.
Eliasson, B., & Kogelschatz, U. (1988). UV excimer radiation from dielectric-barrier discharges. Applied Physics B, 46(4), 299-303.
Fang, Z., Xie, X., Li, J., Yang, H., Qiu, Y., & Kuffel, E. (2009). Comparison of surface modification of polypropylene film by filamentary DBD at atmospheric pressure and homogeneous DBD at medium pressure in air. Journal of Physics D: Applied Physics, 42(8), 085204.
Ghomi, H., Safa, N. N., & Ghasemi, S. (2011). Investigation on a DBD plasma reactor. IEEE Transactions on plasma science, 39(11), 2104-2105.
Goktas, H., Demir, A., Kacar, E., Hegazy, H., Turan, R., Oke, G., & Seyhan, A. (2007). Spectroscopic measurements of electron temperature and electron density in electron beam plasma generator based on collisional radiative model. Spectroscopy letters, 40(1), 183-192.
Guðmundsson, J. T. Notes on the electron excitation rate coefficients for argon and oxygen discharge: RaunvÃsindastofnun Háskólans.
Hassouba, M. A. (2008). Determination of the electrons temperature in a dielectric barrier discharge. Plasma Devices and Operations, 16(2), 81-88.
Kanazawa, S., Kogoma, M., Moriwaki, T., & Okazaki, S. (1988). Stable glow plasma at atmospheric pressure. Journal of Physics D: Applied Physics, 21(5), 838.
Kogelschatz, U. (2001). Filamentary and diffuse barrier discharges. Paper presented at the 2001 APP Spring Meeting Bad Honnef.
Kogelschatz, U. (2003). Dielectric-barrier discharges: their history, discharge physics, and industrial applications. Plasma chemistry and plasma processing, 23(1), 1-46.
Kogelschatz, U., Eliasson, B., & Egli, W. (1997). Dielectric-barrier discharges. Principle and applications. Le Journal de Physique IV, 7(C4), C4-47-C44-66.
Mahendran, R., & Alagusundaram, K. (2015). Uniform discharge characteristics of non-thermal plasma for superficial decontamination of bread slices. International Journal of Agricultural Science and Research (IJASR), 5(2), 209-212.
Massines, F., Rabehi, A., Decomps, P., Gadri, R. B., Ségur, P., & Mayoux, C. (1998). Experimental and theoretical study of a glow discharge at atmospheric pressure controlled by dielectric barrier. Journal of Applied Physics, 83(6), 2950-2957.
Massines, F., Sarraâ€Bournet, C., Fanelli, F., Naudé, N., & Gherardi, N. (2012). Atmospheric pressure low temperature direct plasma technology: status and challenges for thin film deposition. Plasma Processes and Polymers, 9(11â€12), 1041-1073.
Nakagawa, Y., Ono, R., & Oda, T. (2018). Effect of discharge polarity on OH density and temperature in coaxial-cylinder barrier discharge under atmospheric pressure humid air. Japanese journal of applied physics, 57(9), 096103.
Niu, C.-B., Qin, S., Zhang, X., Zhao, H.-X., Liu, X., Mu, H.-B., & Zhang, G.-J. (2018). Discharge characteristics of argon atmosphere dielectric barrier with different pd values. Paper presented at the 2018 12th International Conference on the Properties and Applications of Dielectric Materials (ICPADM).
Okazaki, S., Kogoma, M., Uehara, M., & Kimura, Y. (1993). Appearance of stable glow discharge in air, argon, oxygen and nitrogen at atmospheric pressure using a 50 Hz source. Journal of Physics D: Applied Physics, 26(5), 889.
Rajasekaran, P., Mertmann, P., Bibinov, N., Wandke, D., Viöl, W., & Awakowicz, P. (2010). Filamentary and homogeneous modes of dielectric barrier discharge (DBD) in air: investigation through plasma characterization and simulation of surface irradiation. Plasma Processes and Polymers, 7(8), 665-675.
Shao, T., Wang, R., Zhang, C., & Yan, P. (2018). Atmospheric-pressure pulsed discharges and plasmas: mechanism, characteristics and applications. High voltage, 3(1), 14-20.
Shrestha, R., Tyata, R., & Subedi, D. (2013). Effect of applied voltage in electron density of homogeneous dielectric barrier discharge at atmospherice pressure. Himalayan Physics, 4, 10-13.
Subedi, D. P., Shrestha, R., Tyata, R. B., & Wong, C. S. (2017). Generation and diagnostics of atmospheric pressure dielectric barrier discharge in argon/air. Indian Journal of Pure & Applied Physics (IJPAP), 55(2), 155-162.
Tepper, J., & Lindmayer, M. (2000). Investigations on two different kinds of homogeneous barrier discharges at atmospheric pressure. Paper presented at the Proc. of Int. Symp. on High Pressure, Low Temperature Plasma Chemistry.
Zhi, F., Yuchang, Q., & Hui, W. (2004). Surface treatment of polyethylene terephthalate film using atmospheric pressure glow discharge in air. Plasma Science and Technology, 6(6), 2576.
Di, L., Zhang, J., & Zhang, X. (2018). A review on the recent progress, challenges, and perspectives of atmosphericâ€pressure cold plasma for preparation of supported metal catalysts. Plasma Processes and Polymers, 15(5), 1700234.
Dong, L., Qi, Y., Zhao, Z., & Li, Y. (2008). Electron density of an individual microdischarge channel in patterns in a dielectric barrier discharge at atmospheric pressure. Plasma Sources Science and Technology, 17(1), 015015.
Eliasson, B., & Kogelschatz, U. (1988). UV excimer radiation from dielectric-barrier discharges. Applied Physics B, 46(4), 299-303.
Fang, Z., Xie, X., Li, J., Yang, H., Qiu, Y., & Kuffel, E. (2009). Comparison of surface modification of polypropylene film by filamentary DBD at atmospheric pressure and homogeneous DBD at medium pressure in air. Journal of Physics D: Applied Physics, 42(8), 085204.
Ghomi, H., Safa, N. N., & Ghasemi, S. (2011). Investigation on a DBD plasma reactor. IEEE Transactions on plasma science, 39(11), 2104-2105.
Goktas, H., Demir, A., Kacar, E., Hegazy, H., Turan, R., Oke, G., & Seyhan, A. (2007). Spectroscopic measurements of electron temperature and electron density in electron beam plasma generator based on collisional radiative model. Spectroscopy letters, 40(1), 183-192.
Guðmundsson, J. T. Notes on the electron excitation rate coefficients for argon and oxygen discharge: RaunvÃsindastofnun Háskólans.
Hassouba, M. A. (2008). Determination of the electrons temperature in a dielectric barrier discharge. Plasma Devices and Operations, 16(2), 81-88.
Kanazawa, S., Kogoma, M., Moriwaki, T., & Okazaki, S. (1988). Stable glow plasma at atmospheric pressure. Journal of Physics D: Applied Physics, 21(5), 838.
Kogelschatz, U. (2001). Filamentary and diffuse barrier discharges. Paper presented at the 2001 APP Spring Meeting Bad Honnef.
Kogelschatz, U. (2003). Dielectric-barrier discharges: their history, discharge physics, and industrial applications. Plasma chemistry and plasma processing, 23(1), 1-46.
Kogelschatz, U., Eliasson, B., & Egli, W. (1997). Dielectric-barrier discharges. Principle and applications. Le Journal de Physique IV, 7(C4), C4-47-C44-66.
Mahendran, R., & Alagusundaram, K. (2015). Uniform discharge characteristics of non-thermal plasma for superficial decontamination of bread slices. International Journal of Agricultural Science and Research (IJASR), 5(2), 209-212.
Massines, F., Rabehi, A., Decomps, P., Gadri, R. B., Ségur, P., & Mayoux, C. (1998). Experimental and theoretical study of a glow discharge at atmospheric pressure controlled by dielectric barrier. Journal of Applied Physics, 83(6), 2950-2957.
Massines, F., Sarraâ€Bournet, C., Fanelli, F., Naudé, N., & Gherardi, N. (2012). Atmospheric pressure low temperature direct plasma technology: status and challenges for thin film deposition. Plasma Processes and Polymers, 9(11â€12), 1041-1073.
Nakagawa, Y., Ono, R., & Oda, T. (2018). Effect of discharge polarity on OH density and temperature in coaxial-cylinder barrier discharge under atmospheric pressure humid air. Japanese journal of applied physics, 57(9), 096103.
Niu, C.-B., Qin, S., Zhang, X., Zhao, H.-X., Liu, X., Mu, H.-B., & Zhang, G.-J. (2018). Discharge characteristics of argon atmosphere dielectric barrier with different pd values. Paper presented at the 2018 12th International Conference on the Properties and Applications of Dielectric Materials (ICPADM).
Okazaki, S., Kogoma, M., Uehara, M., & Kimura, Y. (1993). Appearance of stable glow discharge in air, argon, oxygen and nitrogen at atmospheric pressure using a 50 Hz source. Journal of Physics D: Applied Physics, 26(5), 889.
Rajasekaran, P., Mertmann, P., Bibinov, N., Wandke, D., Viöl, W., & Awakowicz, P. (2010). Filamentary and homogeneous modes of dielectric barrier discharge (DBD) in air: investigation through plasma characterization and simulation of surface irradiation. Plasma Processes and Polymers, 7(8), 665-675.
Shao, T., Wang, R., Zhang, C., & Yan, P. (2018). Atmospheric-pressure pulsed discharges and plasmas: mechanism, characteristics and applications. High voltage, 3(1), 14-20.
Shrestha, R., Tyata, R., & Subedi, D. (2013). Effect of applied voltage in electron density of homogeneous dielectric barrier discharge at atmospherice pressure. Himalayan Physics, 4, 10-13.
Subedi, D. P., Shrestha, R., Tyata, R. B., & Wong, C. S. (2017). Generation and diagnostics of atmospheric pressure dielectric barrier discharge in argon/air. Indian Journal of Pure & Applied Physics (IJPAP), 55(2), 155-162.
Tepper, J., & Lindmayer, M. (2000). Investigations on two different kinds of homogeneous barrier discharges at atmospheric pressure. Paper presented at the Proc. of Int. Symp. on High Pressure, Low Temperature Plasma Chemistry.
Zhi, F., Yuchang, Q., & Hui, W. (2004). Surface treatment of polyethylene terephthalate film using atmospheric pressure glow discharge in air. Plasma Science and Technology, 6(6), 2576.